iitm computr education mathura



AutoCAD (MCQs) Multiple-Choice Questions


#autocadmcq #autocad2d #autocaddrawing #autocadarchitecture #autocaddesign #autocadd #autocadplan #autocadtraining #autocadcivil3d 
.
.

.
Created by Inflact Hashtags Generator

AutoCAD is a commercial Computer-Aided Design and drafting Software Application. Developed and Marketed by Autodesk.
It is used to draw and edit digital 2D & 3D designs more quickly.


AutoCAD MCQs:
This section contains AutoCAD (MCQs) Multiple-Choice Questions with Answers. These MCQs are written for beginners as well as advanced, practice these MCQs to enhance and test the knowledge of AutoCAD.




List of AutoCAD MCQs




1. In AutoCAD 2D Modelling, which axis is not accessible for drafting?

(A).X

(B).Y

(C).Z

(D).WCS

Answer: (C) Z

Explanation:  Z axis is relevant to 3D modelling.




2. A Polyline can be broken into individual lines and arcs using which of the following command?

(A). BREAK

(B). TRIM

(C). EXPLODE

(D). OVERKILL

Answer: (C) EXPLODE


Explanation: Explode command is used to separate polyline to individual entities.


3. Origin of the AutoCAD drawing space is,

(A).0,0

(B).1,0

(C).0,1

(D).1,1

Answer: (A). 0,0


Explanation: (0,0) is the origin for AutoCAD.



4. Scrolling of mouse can perform which following action?

(A). Zoom in / zoom out

(B). Sscale

(C). Pan & scan

(D). extents / all

Answer: (D) extents / all

Explanation:  It is one of the shortcut methods to zoom in and out of the workspace.



5. In AutoCAD, the number of workspaces is..........

(A).1

(B). 2

(C). 3


(D). 4

Answer: (B) 2

Explanation:  2D Modelling and 3D Modelling.


6. Is there any difference between Command Plot and Print?


(A). Plot command prints only big plans

(B).The plot command for CNC (CAM)

(C).No difference

(D).print command can print up to A3 size paper

Answer: C) No difference


Explanation:  No difference exists between Command Plot and Print.



7. Find the false statement in regards with "If an array is made associative".

(A).You can't use Boolean operations on the array elements

(B).To make the array non associative you need to use explode command on it

(C). The array can be edited again by selecting it

(D). The array can't be modified in any way once it is made associative

Answer: D) The array can't be modified in any way once it is made associative



Explanation:  An associative array can be modified in AutoCAD.



8. An open area can be filled with which of the following gradient:


(A).Gap

(B). Tolerance

(C). Transparency

(D). Open

Answer: B) Tolerance

Explanation: Tolerance is one of the sub commands of hatching to fill to open area.



9. The shortcut to start a table is,

(A). T

(B). TA

(C). TBL


(D). TABLE

Answer: D) TABLE


Explanation:

This command opens a table like that in office.





10. What is the shortcut for zoom command?

(A).Z Command

Rotate mouse wheel

ZOOM Command

All of the above

Answer: D) All of the above



Explanation:
All the above methods can be used to zoom in and out the workspace.



11. To select a set of objects in the workspace, what should be done?

(A).By a crossing window drawn from right to left

By a crossing window drawn left to right

Shift + clicking on the objects

None of the above

Answer: A) By a crossing window drawn from right to left


Explanation:

This control selects the objects present in the design space.









12. A line shows its dimension as 14.52. What is the precision of this line?

(A).[0.0]

[0.00]

[0.000]

Display of length has nothing to do with precision

Answer: B) [0.00]

Explanation:

Since there are two numbers after the decimal point.



13. Model Tab and Layout Tab can be majorly distinguished as,


(A).The Model tab is used for drawing in 3D and a Layout is used for drawing in 2D

The Model tab is where you create the drawing, and a Layout tab represents the sheet that you will plot or print on

The colour of the background

The Model tab displays the drawing you are copying from and the Layout tab is where you lay out the new drawing

Answer: B) The Model tab is where you create the drawing, and a Layout tab represents the sheet that you will plot or print on




Explanation:

The option clearly explains the solution.









14. Shortcut key for Multileader in AutoCAD 2022,


ML

MLN

MLEADER

MULTI

Answer: C) MLEADER




Explanation:
This command produces a multileader.









15. To bring a particular area of the workspace in focus, what command should be used?


Zoom Extents

Zoom Window

Zoom Dynamic

Zoom All

Answer: B) Zoom Window




Explanation:
This command zooms only the required region.


16. What are the various options from left to right and the opposite direction?

Choose a different category of objects

Select objects according to their colour

Select objects according to their position

No difference

Answer: B) Select objects according to their colour


Explanation:
You can select different coloured objects.






17. Shortcut for Trim command is,

T

TR

TI

X

Answer: B) TR

Explanation:
The shortcut for Trim command is TR.


18. A Boolean operation that is used to select interfering region between solids,

Union

Intersect

Subtract

None of the above

Answer: B) Intersect



Explanation:
Intersect command produces only intersecting regions of two solids.


19. What command allows us to select objects based on some status?

Properties

(A).Qselect

Pselect

Attributes

Answer: B) Qselect

Explanation:

It allows to select objects based on the predetermined conditions.


20. If you change the scale list a project that I have started from 1:50 1:10 then,

(A).You will have to start over

You should not raise the objects already exist (scale) by 5

You will not need to change anything in hitherto methodology

Should be converted into new items that will add based on the new scale

Answer: (A).) You will have to start over


Explanation:

You will have to start over again.



21. A line 4mm in length inclined at 75 degrees to the x- axis can be represented as,


(A).will write 0 <75

will write 0 <15

will write 4 <15

will write 4 <75

Answer: C) will write 4 <15



Explanation:
Use the line command with dimension @ angle.


22. How will you create a line representing length 15 units at an angle of 30 degrees with respect to the positive direction of the X-axis and the first point of the line is not at the origin?

30<15

15<30

@30<15

@15<30

Answer: D) @15<30

Explanation:
This command produces the required line.


23. Which of the following options cannot be used to represent a line?


(A).Yards

Parsecs

Microns

Grads

Answer: D) Grads


Explanation:
The first three options are to represent a line with measurement.

24. A fillet command is used to produce,
(A).Sharp corners

Round corners

Both of the above

None of the above

Answer: C) Both of the above

Explanation:

Filleting produces a curved corner.


25. Which one of the following is not a property of an object?




(A).Line weight

Measure

Hyperlink

Elevation

Answer: B) Measure




Explanation:




Measure is used to measure the length of a line.









26. In MLine tool editor, symbol tool can be found on which panel?

(A).Tools

Insert

Options

Formatting

Answer: B) Insert




Explanation:

Under Insert option, you can find the symbol tool.



27. What is the default design workspace in AutoCAD 2022?




AutoCAD Classic

Drafting & Annotation

3D Basics

3D Modelling

Answer: B) Drafting & Annotation




Explanation:




It is set by Autodesk.









28. What time (according to the clock) are 180 degrees according to the conventional time?




12 exactly

6 exactly

9 exactly

3 exactly

Answer: C) 9 exactly




Explanation:




Calculate the angle from the origin.









29. Which coordinate option can be used to reset the orientation of UCS to its default?




UCS, World

UCS, Named UCS

UCS, Previous

UCS Icon, Properties

Answer: A) UCS, World




Explanation:




It can reset UCS to default.









30. An object can be obtained from a block by using,




EXPLODE

OVERKILL

REDEFINE

UNGROUP

Answer: A) EXPLODE




Explanation:




Explode command separates a group of objects into individual entities.














31. The symbol that shows snap point to the closet point,




With circles and dots in the centre

With two triangles

With three orthogonal

With Diamond

Answer: C) With three orthogonal




Explanation:




With three orthogonal symbol we can find it out.









32. In order to measure the dimensions of a land, the surveyor uses which of the following system,




No one method

Related cartesian coordinates

Absolute polar coordinates

None of the above

Answer: A) No one method




Explanation:




Because there is no standard method followed universally.









33. The command that is used to convert a block into a drawing object,




EXPLODE

OVERKILL

REDEFINE

UNGROUP

Answer: C) REDEFINE




Explanation:




It is used for the above function.









34. The function of a polar array is to create object,




In a grid pattern

In a circular pattern

In a straight line

All the above

Answer: B) In a circular pattern




Explanation:




Similar objects around a centre is created.









35. Fillet in various corners can be created simultaneously using which command,




Loop

Chain

Multiple

Edge

Answer: A) Loop




Explanation:




Loop command enables the user to select multiple entities.









36. The command used to convert separate entities into a polyline,




Union

Subtract

Join

Polyline

Answer: C) Join




Explanation:




Join command connects separate entities into a group.









37. Command used to create a rectangle 8 units in length and 6 units in width, starting not from the origin,




8,6

6,8

@8,6

@6,8

Answer: C) @8,6




Explanation:




@ operation enables the rectangle to be created away from the origin.









38. AutoCAD commands can be accessed in,




Drawing area

Status bar

Tool bars

Command window

Answer: D) Command window




Explanation:




It is present at the bottom centre.









39. Various methods to access PAN command,




Right click and select PAN from contextual menu

PAN command

Press and hold middle mouse button

All of the above

Answer: D) All of the above




Explanation:




Both of the values "NULL" and "null" are NULL. Thus, the output will be "NULL NULL".









40. The file extension that cannot be accessed by AutoCAD,




dwg

dxf

doc

dws

Answer: C) doc




Explanation:




"doc" is the file format of Microsoft Word









41. Plagiostomi angle can be created by which angle,




chamfer

fillet

offset

mirror

Answer: A) chamfer




Explanation:




Chamfer command can be used.









42. In AutoCAD, polar coordinate is used for creating,




arc

ellipse

angular lines

none of the above

Answer: A) arc




Explanation:




Arc can be created using polar coordinate.









43. To print the entire project, you will choose to regulate what to plot




Display

Extends

Limits

Window

Answer: A) Display




Explanation:




It enables to print the required workspace.









44. The layer that can be deleted from the layer property manager,




Layer 0

Defpoints

Layer containing objects

Frozen layer not containing objects

Answer: D) Frozen layer not containing objects




Explanation:




It does not contain any information.









45. The maximum number of layers that a drawing can have?




1

2

As many as depending on the complexity

None of the above

Answer: C) As many as depending on the complexity




Explanation:




It entirely depends on the drawing intricacy.









46. The hatch pattern used to fil a closed area,




ANSI31

ANGLE

SOLID

Filled area can't be made with hatch command

Answer: C) SOLID




Explanation:




It generates the hatch pattern for visual identification.









47. Which state grid is used to design perspective?




Parametric

Isometric

Pro-optic

Rectangular

Answer: B) Isometric




Explanation:




It enables a 3D view









48. The position of the camera can be tuned accurately using,




Pan

Zoom

Orbit

Navigation Wheel

Answer: D) Navigation Wheel




Explanation:




This command is majority used in rendering.









49. What is the highest value of layer transparency?




100

50

30

90

Answer: D) 90




Explanation:




90 is the highest value.









50. An inclined angle can be produced using which command.




<

>

@

#

Answer: A) <




Explanation:




Less than symbol (<) is used for this purpose.









51. The command that is not suitable to start print command,




PRINT

PR

PLOT

ctrl + P

Answer: B) PR




Explanation:




All, but option B cannot be used.









52. If I want to draw a line in the direction 6 pm (local time) will give an angle,




-135 degrees

270 degrees

-225 degrees

None of the above

Answer: B) 270 degrees




Explanation:




Refer the angle from origin.









53. The number of ways a circle can be created in AutoCAD,




4

5

6

8

Answer: C) 6




Explanation:




There are 6 distinct ways of creating circle.









54. An object has how many snaps in AutoCAD?




1

4

5

Depend on object

Answer: D) Depend on object




Explanation:




It depends on the complexity of the object.









55. Which factor of hatch command you will change to correct the spacing between hatch lines or pattern?




Pattern

Angle

Scale

Layer

Answer: C) Scale









56. The extension for AutoCAD drawing file is,




DWG

DWT

DWF

DXF

Answer: A) DWG









57. What is the usefulness of viewports?




Allows us to see the screen or on paper different views of the same project

Give us the ability to see projects have become a newer version of AutoCAD from our

We can make a change in one part of the plan, without affecting the rest

None of the above

Answer: A) Allows us to see the screen or on paper different views of the same project









58. The shortcut key to enable snap n AutoCAD,




F2

F3

F5

F8

Answer: B) F3




Explanation:




F3 enables snap on/off.









59. In AutoCAD, scaling function is used for making an object,




Smaller

Bigger

Either smaller or bigger

None of the above

Answer: C) Either smaller or bigger




Explanation:




Scaling can be done in both ways.









60. Block Control should be used,




To write text block

To fix outer block

To fix dynamic block

To store it in another version of AutoCAD

Answer: C) To fix dynamic block




Explanation:




It is the primary function of block control.









61. Which of the following AutoCAD command does not have a thickness property?




TEXT

MTEXT

LINE

CIRCLE

Answer: B) MTEXT




Explanation:




It is used to produce texts without any dimension in Z-axis.









62. Identify the command that does not belong to the Boolean group in AutoCAD,




Union

Subtract

Intersect

Divide

Answer: D) Divide




Explanation:




It is a mathematical operation.









63. Rectangle command can be defined using how many commands,




One

Two

Three

Four

Answer: B) Two




Explanation:




Left bottom and Right Top corner should be provided.









64. Which of the following tool cannot be used to make 2D views from 3D drawing?




Flatten

Flatshot

Layout Views

Section Plane

Answer: D) Section Plane




Explanation:




Section Plane is used to provide interior details.









65. When in absolute Cartesian coordinates have points A (10.8) and B (6.5), then to make a line from A -> B with relative polar coordinates will write,




@ -5 <36.88

@ 4 <30

@ 5 <216,88

@ 3 <60

Answer: C) @ 5 <216,88




Explanation:




It produces the required line.









66. An animation video in AutoCAD cannot be created in which of the following format?




3GP

WMV

AVI

MPG

Answer: A) 3GP




Explanation:




It is not supported in AutoCAD.









67. The shortcut used to save a drawing in AutoCAD,




CTRL + S

SHIFT + S

ALT + S

CTRL + ALT + S

Answer: A) CTRL + S




Explanation:




It is used for saving.









68. Print scale 1:100 means that,




The draft is 100 times less expensive than the original

A 3 cm corresponds to a meter

A measure corresponds to 100 cm

None of the above

Answer: A) The draft is 100 times less expensive than the original



Explanation:
Scaling reduces or increases the size of the object.

69. AutoCAD file is saved in which format?


A) DWG

B) DWT

C)DWF

DXF

Answer: A) DWG

Explanation:
DWG is the standard file format of AutoCAD.


70. The shortcut command for a rectangle,

A) R

B) RE

C) REC

D) RET

Answer: C) REC

Explanation:

This command is used to create a rectangle.













Post a Comment

Thnanks for Reply.

और नया पुराने